Old Terrazzo tiled hallway floor restored in Southbourne

I do enjoy breathing new life into old floors as was the case with this Terrazzo tiled hallway floor in Southbourne near Bournemouth, installed in 1924 it had been knocked about by various building alterations and then finally covered in a carpet which had been glued to the floor.

Terrazzo Tiled Floor Before Cleaning in Southbourne

Removing Adhesive from Terrazzo tiles

Stubborn remnants of the carpet adhesive were removed using Tile Doctor NanoTech HBU Remover which is applied to the tiles and then left to soak in for a before being scrubbed in with a black buffing pad and a dilution of Tile Doctor Pro-Clean. HBU actually stands for Heavy Buid-up Remover and it’s a great problem solver that penetrates through tough stains and coatings so they can be easily removed. The floor was then washed down with clean water and any areas that needed further attention were retreated until I was satisfied with the floor was clean and free of glue.

The next step was to re-polish the Terrazzo using a set of of Tile Doctor burnishing pads which are applied in sequence from Coarse through to Super Fine with a little water to help lubricate. The coarse pad removes any surface grime and old sealant and the remaining pads build up the polish to bring back the original shine. The floor is washed down between each pad to remove the soil generated during the process.

Sealing Terrazzo Tiles

Cleaning took most of the day so I returned the next day to apply the sealer testing the floor first to ensure it was dry. To seal the floor I used a couple of coats of Tile Doctor Colour Grow which is a colour enhancing sealer that impregnates into the pores of the stone and prevents contaminates staining the floor.
The customer decided that she would conceal the concrete patches at the edges of the floor using Colours Stone Effect speckled spray paint which is available in B&Q in her own time.

Terrazzo Tiled Floor After Cleaning in Southbourne

As you can see from the photos the floor looked a hundred times better and the customer was very satisfied with the result.
 
 

Restoring a 1924 Terrazzo Tiled Floor in Dorset

Black Limestone Flagstone floor restored in Sherbourne

This Georgian house in the beautiful historic town of Sherbourne, Dorset still had its original floor of black limestone flagstones. These were in a sorry condition, having been smoothed over with a cement screed to make it level for a carpet and, before that, painted at various times with both red and green floor paint.
A combination of cement, hardened carpet glue and old floor paints all needed to be completely removed before I could even begin to clean the original stone beneath.

Black Limestone Sherbourne Before Cleaning

Removing Sealer from Limestone Floor Tiles

After chipping away the areas of cement with a chisel I used an application of Tile Doctor Remove and Go which was left to soak into the stone for a while in order to loosen the old floor paint before steaming and wire-brushing the entire floor. This I followed with an application of Tile Doctor “Pro Clean” scrubbed in with a black buffing pad under fitted to a Numatic buffing machine to further clean the slabs.

Next step was to cut back and re-polish the Limestone flagstone using of a set of diamond encrusted burnishing pads fitted to a rotary machine. You start with a coarse pad with a little water, then a medium pad, fine pad and finish with a very fine polishing pad rinsing the floor between each pad.

Sealing Limestone Floor Tiles

Following all this treatment the flagstones needed a few days to thoroughly dry out after which I returned to seal them with Tile Doctor “Colour Grow”, a long lasting impregnating sealer which enhanced the natural colour of the tiles and turned them from a drab grey to a rich and shining black.

Black Limestone Sherbourne After Cleaning
 

Black Limestone Floor Polished and Sealed in Dorset

Cleaning a Stone Fireplace in Canford Cliffs

This fireplace at a house at Canford Cliffs near Poole, Dorset and was constructed from a mixture of Limestone and Sandstone, both of which had suffered from ingrained soot damage in the forty plus years since in had been installed. The owners of the property wanted it cleaning up and although we tend to focus on tiles the methods and products we use work equally well on stone fireplaces so I was happy to take it on.

Canford Cliffs Stone Fireplace Before Cleaning

Removing Sealer from Limestone Floor Tiles

The first task was to protect the carpet in from of the fireplace from splashing and any potential mess and then I applied a strong mixture of Tile Doctor “Pro Clean” in warm water. It was left to soak in for a short while before being scrubbed into the stone by hand with a grout brush and a brass coated Spid wire brush which helped to brush away the more ingrained dirt. This took off the majority of the soil from the stone and a further application of Pro Clean was applied which I steamed off using an Earlex steamer and then rinsed thoroughly always taking care to minimise any run off.

Sealing Limestone Floor Tiles

Any stone needs to be bone dry before sealing so I left the Fireplace to dry for two days before returning to seal it using a number of coats of Tile Doctor Seal and Go which sank into the porous stones and enriched their colour as well as protecting them from further staining.

Canford Cliffs Stone Fireplace After Cleaning
The fireplace is now looking like new again and has become a really attractive feature.

Stone Fireplace Cleaned and Sealed in Dorset

Sealing Limestone Floor Tiles at Canford Cliffs

Slightly unusual job this one involving a Limestone tiled floor at a house in Canford Cliffs which is a beautiful part of Dorset near Poole overlooking the sea. The tiles had only recently been laid and then sealed by a tiler, unfortunately however too much sealer had been applied and it had been allowed to dry on the surface of the tiles causing a smeared and messy appearance.

Limestone Tiled Floor Canford Cliffs Before

Removing Sealer from Limestone Floor Tiles

To remove the sealer from the floor the surface needs to be cut back and re-polished using of a set of diamond encrusted burnishing pads fitted to a rotary machine. You start with a coarse pad with a little water, then a medium pad, fine pad and finish with a very fine polishing pad, this takes some time but the effect it quite transforming, it does build up slurry on the floor so it all needs to be rinsed down using water and a wet vacuum to remove the liquids the wet vacuum also helps to get the floor dry.

Sealing Limestone Floor Tiles

The floor was left to fully dry overnight and I returned the next day to seal the Limestone tiles using a coat of Tile Doctor Colour Grow carefully applied using a B&Q paint pad. Colour Grow is an impregnating sealer that fills the pores in the Limestone to prevent other contaminates staining the stone; it’s also a colour enhancing sealer that lifts the natural colours in the Limestone. Once dry the floor was buffed using a Numatic buffing machine fitted with a soft white pad to give a perfect finish to the floor.

Limestone Tiled Floor Canford Cliffs After
The floor is now looking as it should and the customer was delighted with the result, needless to say the tiler was very relieved.

Limestone Floor Polished and Sealed in Dorset

Cleaning and Sealing Shell Slate Kitchen Tiles in Lytchett Minster

This Shell Slate tiled floor was installed in the kitchen of a house in Lytchett Minster and had not been sealed after its installation over twenty years ago and had now become deeply ingrained with dirt which the owner could not remove however hard she tried.

Cleaning Shell Slate Tiles

To clean the tiles I used Tile Doctor Pro-Clean diluted one part cleaner to five parts water, the solution was applied it to the floor and then left to soak in for ten minutes before working it in with a Numatic buffing machine fitted with 17″ medium firm brush. Next the tiles were steamed using an Earlex steamer and stubborn stains cleaned by hand using sections from a cut-up black buffing pad and a Spid brass-coated wire brush where necessary. Being riven slate the floor was too uneven to successfully clean using a black buffing pad fitted to a rotary machine as the sunken parts of the tile would have been missed and so cleaning tile by tile was the only option to ensure the slate was returned to the best possible condition. A stiff brush was also run along the grout lines before thoroughly rinsing the floor to remove any trace of cleaning product.

Shell Slate at Lytchett Minster Before Cleaning

Sealing Shell Slate Tiles

The floor was left to dry overnight and I returned the next day to seal using two coats of Tile Doctor Colour Grow sealer which is a penetrating sealer that occupies the pores in the tile preventing contaminates from lodging there and enhances the many beautiful colours of the Slate as well as leaving a subtle shine to floor.

Shell Slate at Lytchett Minster After Cleaning
The customer was very pleased with the result and said that she hadn’t before seen the true colour of her floor.

Shell Slate Tiled Kitchen Floor Cleaned and Sealed in Dorset

Cleaning a Travertine tiled hallway in Sandbanks

Occasionally I get a call to pop down to Sandbanks on the Dorset Coast which is well known for containing the most expensive property in the UK outside of London. This particular residence had a Travertine tiled hallway which was badly in need of renovation, it had become very soiled and dirt had become trapped in holes that has opened up in the stone over time and now needed cleaning and filling.

Travertine Tiled Floor Sandbanks Before Cleaning

Cleaning and Filling a Travertine Tiled Floor

I began by applying a dilution of Tile Doctor Pro-Clean which was left to soak into the floor for ten minutes before being worked into the tile and grout using a Numatic buffing machine fitted with a medium brush. I then dried the floor using a hot air gun and filled the holes with Harbro Stone Filler which is an epoxy filler as hard as the stone itself. I carefully scraped off the excess filler before leaving it to set overnight.

Burnishing Travertine Tiles

The next day I used 17″ wet and dry paper to remove the excess filler and to cut out some of the deep scratches in the travertine. This I followed by honing and polishing the floor using Tile Doctor burnishing pads which are diamond encrusted and come in a setup of four pads which are applied one after the other from Coarse, Medium, Fine and then Super Fine to restore the surface polish.

Sealing Travertine Tiles

On the third day I returned to seal the Travertine tiles using Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that soaks into the pores of the stone occupying them and in doing so preventing dirt and soil from becoming ingrained into the stone. Colour Grow is also a colour enhancing product that brings out the colour in the stone

Travertine Tiled Floor Sandbanks After Cleaning
Unfortunately I didn’t remember to take a photo of the floor until after the initial clean but the effect of the filling and burnishing pad treatment should be visible.

Travertine Tiled Hallway Burnishing in Dorset

Cleaning old Yellow Ceramic Floor tiles in Poole

This fifty year old Ceramic tiled floor was installed in the communal parts of a small block of flats in Poole, Dorset. The tiles had not been given a deep clean in a long while and were now ingrained with dirt from many years of wear.

Yellow Ceramic Tiles Before Cleaning in Poole

Cleaning Ceramic Floor Tile and Grout

To clean the tiles a strong dilution of Tile Doctor Pro-Clean was applied a left to soak into the tile for some time before working it into the floor using a rotary machine fitted with a black scrubbing pad. During this process it became clear that there was evidence that the tiles had been previously sealed using a metallised emulsion. This needed to be completely removed by buffing the floor and then steaming it; steaming also removed a myriad of paint spots that had accumulated over the years.

At this stage we took the opportunity to give the grout a good scrub with more Pro-Clean and a stiff hand brush before removing the cleaning solution with a wet vacuum and giving the entire floor a thorough rinse to remove and trace of cleaning product.

Sealing Ceramic Floor Tiles

The tiles were left to dry off overnight and we came back the next day to see if further work was needed. Now normally Ceramic tiles have a glazed surface that a sealer cannot take to however these tiles being were very old and the glaze had been worn off so sealed a small test are to see if it would take. The test was successful so I proceeded to seal the whole floor using Tile Doctor Colour Grow.

Due to the age of the tiles some were more faded than others which I could do nothing about however they looked generally clean and bright after restoration and the new Colour Grow sealer should provide protection for years to come.

Yellow Ceramic Tiles After Cleaning in Poole

 
 

Old Ceramic Tiled Floor Cleaned in Dorset

Cleaning a Tumbled Marble floor in Dewlish near Dorchester

This 50m2 Tumbled Marble tiled floor in Dewlish, near Dorchester had not been deep cleaned and re-sealed for at least five years and showed signs of the normal wear and tear associated with a busy kitchen/dining room and a dog that enjoyed muddy walks. The old sealer was now breaking down allowing dirt to become ingrained in the Marble making it difficult to clean.

Tumbled Marble in Dewlish Before Cleaning

Stripping a Tumbled Marble Floor

To restore the surface finish it needed to be burnished using a set of diamond encrusted burnishing pads. The pads come in a number of different grades from coarse (used to strip off sealers and dirt from the Marble) too very fine (used for final polishing) and are applied one after another starting with the coarse pad and moving through to the very fine pad towards the end. Each stage requires a little water which captures the soil and is rinsed away and removed with a wet vacuum. This process completely removed the old sealer and surfaces scratches with a new shine. The floor was given a thorough wash down at this point again using a wet vacuum to remove as much water as possible from the surface before leaving it to dry for the evening.

Sealing Tumbled-Marble Tiles

The next day the Marble had dried and I started to seal the tiles using two coats of Tile Doctor Colour Grow sealer which was first applied to a couple of test tiles first to ensure it gave the effect the customer was looking for.

Tumbled Marble in Dewlish During Sealing

Colour Grow is a colour enhancing sealer that brings out the natural colour of the tile and certainly the customer was pleased with the results so the sealing work continues until the whole 50m2 floor had been sealed with two coats.

Tumbled Marble in Dewlish After Cleaning and Sealing

When the whole fifty square metres of floor had been sealed using Colour Grow the effect was dramatic and the owners were so pleased with the result that they invited over a friend with a similar stone floor who immediately asked for her floor to be done in the same way.
 
 

Tumbled Marble Floor Restoration in Dewlish near Dorchester

Terracotta Tile and Grout Cleaned Following Freezer Leak

This small Terracotta tiled floor with tumbled travertine inserts at a house in Middlemarsh, Dorset was around 25M² and had been in place for over ten years, since before the owner moved in. After a recent freezer leak caused the tiles and grout to become stained in the utility area; the customer was looking to either clean them or replace them as she wasn’t that keen on them anyway.

Terracotta Tile During Cleaning

After a demonstration of what could be achieved she was happy to go ahead and have them stripped and resealed as opposed to the more expensive replacement option.

Terracotta Tile Before Cleaning

Cleaning Terracotta Tiles

The floor was covered in a strong dilution of Tile Doctor Pro-Clean and this was left to dwell on the floor to allow it to soak into the tile and get to work on the dirt and breakdown any remaining sealer. The solution was then worked into the tile and grout using a heavy 17″ rotary scrubbing machine and then rinsed down using a high pressure wash to remove the soiled solution and neutralise the floor of any remaining cleaning solution before sealing. The grout proved to be stubborn to clean so we had to repeat the process a second time and use stiff hand brushes along the grout lines to get them clean.

You should be able to appreciate from the photographs below how we have managed to get the floor back to its original state and the difference in the grout particularly which was looking very dark prior to cleaning.

Terracotta Tile After Cleaning Terracotta Tile After Cleaning

Sealing Terracotta Floor Tiles

The customer had opted to seal the floor themselves with Tile Doctor Seal and Go naturally I was keen to see how it came out so I asked them to send me some photographs a couple of which are shown below. The final result is a practically new floor and the customer is very happy with it.

Terracotta Tile After Sealing Terracotta Tile After Sealing

 
 

Terracotta Tiles Transformed in Dorset