This 50m2 Tumbled Marble tiled floor in Dewlish, near Dorchester had not been deep cleaned and re-sealed for at least five years and showed signs of the normal wear and tear associated with a busy kitchen/dining room and a dog that enjoyed muddy walks. The old sealer was now breaking down allowing dirt to become ingrained in the Marble making it difficult to clean.
Stripping a Tumbled Marble Floor
To restore the surface finish it needed to be burnished using a set of diamond encrusted burnishing pads. The pads come in a number of different grades from coarse (used to strip off sealers and dirt from the Marble) too very fine (used for final polishing) and are applied one after another starting with the coarse pad and moving through to the very fine pad towards the end. Each stage requires a little water which captures the soil and is rinsed away and removed with a wet vacuum. This process completely removed the old sealer and surfaces scratches with a new shine. The floor was given a thorough wash down at this point again using a wet vacuum to remove as much water as possible from the surface before leaving it to dry for the evening.
Sealing Tumbled-Marble Tiles
The next day the Marble had dried and I started to seal the tiles using two coats of Tile Doctor Colour Grow sealer which was first applied to a couple of test tiles first to ensure it gave the effect the customer was looking for.
Colour Grow is a colour enhancing sealer that brings out the natural colour of the tile and certainly the customer was pleased with the results so the sealing work continues until the whole 50m2 floor had been sealed with two coats.
When the whole fifty square metres of floor had been sealed using Colour Grow the effect was dramatic and the owners were so pleased with the result that they invited over a friend with a similar stone floor who immediately asked for her floor to be done in the same way.
Tumbled Marble Floor Restoration in Dewlish near Dorchester
These Marble Tiles were laid in an en-suite bathroom at a house in Bridport, the main problems to be addressed WERE that the floor had dulled and lost most of its shine, there was also a coffee stain in the corner which needed to be addressed.
Removing Stains from Marble Tile
To remove the ingrained coffee stain we used Tile Doctor Reduxa, which is a penetrating stain remover used in conjunction with a heat gun, it can take a little time to work but its very easy to apply, I’ve copied the instructional video below so you can see for yourself.
Polishing Marble Floor Tiles
Before polishing the marble tiled floor we set about giving it a quick clean using a mild dilution of Tile Doctor Pro-Clean to ensure there was no grit on the floor that could lead to deep scratches when polishing. The floor was then rinsed with clean water to remove and chemical residue and we then began polishing the floor using a set of burnishing pads fitted to a heavy buffing machine. There are four pads in the set each encrusted with very fine diamonds, you start the process with the Red pad which is designed to remove sealers, followed by the White polishing pad for the removal of ingrained dirt then the Yellow smoothing pad and finally the Green polishing pad.
Sealing Marble Tiles
The floor was then washed down to remove any remnants from the polishing process and dried off so it could be sealed. To seal the floor we used a single coat of Tile Doctor Ultra Seal which is a premium penetrating sealer that gives a natural appearance and will provide long lasting stain protection going forward.
The customer requested the coffee stain removed and a high shine finish and was not disappointed, my photography skills aren’t brilliant but hopefully you can also see the improvement.
Cleaning and Polishing Marble Bathroom Tiles in Dorset