Black Limestone Sherbourne Before and After Cleaning

Black Limestone Flagstone floor restored in Sherbourne

This Georgian house in the beautiful historic town of Sherbourne, Dorset still had its original floor of black limestone flagstones. These were in a sorry condition, having been smoothed over with a cement screed to make it level for a carpet and, before that, painted at various times with both red and green floor paint.
A combination of cement, hardened carpet glue and old floor paints all needed to be completely removed before I could even begin to clean the original stone beneath.

Black Limestone Sherbourne Before Cleaning

Removing Sealer from Limestone Floor Tiles

After chipping away the areas of cement with a chisel I used an application of Tile Doctor Remove and Go which was left to soak into the stone for a while in order to loosen the old floor paint before steaming and wire-brushing the entire floor. This I followed with an application of Tile Doctor “Pro Clean” scrubbed in with a black buffing pad under fitted to a Numatic buffing machine to further clean the slabs.

Next step was to cut back and re-polish the Limestone flagstone using of a set of diamond encrusted burnishing pads fitted to a rotary machine. You start with a coarse pad with a little water, then a medium pad, fine pad and finish with a very fine polishing pad rinsing the floor between each pad.

Sealing Limestone Floor Tiles

Following all this treatment the flagstones needed a few days to thoroughly dry out after which I returned to seal them with Tile Doctor “Colour Grow”, a long lasting impregnating sealer which enhanced the natural colour of the tiles and turned them from a drab grey to a rich and shining black.

Black Limestone Sherbourne After Cleaning
 

Black Limestone Floor Polished and Sealed in Dorset

Black Limestone Flagstone floor restored in Sherbourne Read More »