Sandbanks Tile Cleaning

Sandbanks Tile Cleaning

Welcome to my Work History archive where you will find examples of the cleaning and renovation of tiles carried out in Sandbanks.

Canford Cliffs Stone Fireplace Before and After Cleaning

Cleaning a Stone Fireplace in Canford Cliffs

This fireplace at a house at Canford Cliffs near Poole, Dorset and was constructed from a mixture of Limestone and Sandstone, both of which had suffered from ingrained soot damage in the forty plus years since in had been installed. The owners of the property wanted it cleaning up and although we tend to focus on tiles the methods and products we use work equally well on stone fireplaces so I was happy to take it on.

Canford Cliffs Stone Fireplace Before Cleaning

Removing Sealer from Limestone Floor Tiles

The first task was to protect the carpet in from of the fireplace from splashing and any potential mess and then I applied a strong mixture of Tile Doctor “Pro Clean” in warm water. It was left to soak in for a short while before being scrubbed into the stone by hand with a grout brush and a brass coated Spid wire brush which helped to brush away the more ingrained dirt. This took off the majority of the soil from the stone and a further application of Pro Clean was applied which I steamed off using an Earlex steamer and then rinsed thoroughly always taking care to minimise any run off.

Sealing Limestone Floor Tiles

Any stone needs to be bone dry before sealing so I left the Fireplace to dry for two days before returning to seal it using a number of coats of Tile Doctor Seal and Go which sank into the porous stones and enriched their colour as well as protecting them from further staining.

Canford Cliffs Stone Fireplace After Cleaning
The fireplace is now looking like new again and has become a really attractive feature.

Stone Fireplace Cleaned and Sealed in Dorset

Cleaning a Stone Fireplace in Canford Cliffs Read More »

Limestone Tiled Floor Canford Cliffs Before and After

Sealing Limestone Floor Tiles at Canford Cliffs

Slightly unusual job this one involving a Limestone tiled floor at a house in Canford Cliffs which is a beautiful part of Dorset near Poole overlooking the sea. The tiles had only recently been laid and then sealed by a tiler, unfortunately however too much sealer had been applied and it had been allowed to dry on the surface of the tiles causing a smeared and messy appearance.

Limestone Tiled Floor Canford Cliffs Before

Removing Sealer from Limestone Floor Tiles

To remove the sealer from the floor the surface needs to be cut back and re-polished using of a set of diamond encrusted burnishing pads fitted to a rotary machine. You start with a coarse pad with a little water, then a medium pad, fine pad and finish with a very fine polishing pad, this takes some time but the effect it quite transforming, it does build up slurry on the floor so it all needs to be rinsed down using water and a wet vacuum to remove the liquids the wet vacuum also helps to get the floor dry.

Sealing Limestone Floor Tiles

The floor was left to fully dry overnight and I returned the next day to seal the Limestone tiles using a coat of Tile Doctor Colour Grow carefully applied using a B&Q paint pad. Colour Grow is an impregnating sealer that fills the pores in the Limestone to prevent other contaminates staining the stone; it’s also a colour enhancing sealer that lifts the natural colours in the Limestone. Once dry the floor was buffed using a Numatic buffing machine fitted with a soft white pad to give a perfect finish to the floor.

Limestone Tiled Floor Canford Cliffs After
The floor is now looking as it should and the customer was delighted with the result, needless to say the tiler was very relieved.

Limestone Floor Polished and Sealed in Dorset

Sealing Limestone Floor Tiles at Canford Cliffs Read More »

Travertine Tiled Floor Sandbanks Before and After Cleaning

Cleaning a Travertine tiled hallway in Sandbanks

Occasionally I get a call to pop down to Sandbanks on the Dorset Coast which is well known for containing the most expensive property in the UK outside of London. This particular residence had a Travertine tiled hallway which was badly in need of renovation, it had become very soiled and dirt had become trapped in holes that has opened up in the stone over time and now needed cleaning and filling.

Travertine Tiled Floor Sandbanks Before Cleaning

Cleaning and Filling a Travertine Tiled Floor

I began by applying a dilution of Tile Doctor Pro-Clean which was left to soak into the floor for ten minutes before being worked into the tile and grout using a Numatic buffing machine fitted with a medium brush. I then dried the floor using a hot air gun and filled the holes with Harbro Stone Filler which is an epoxy filler as hard as the stone itself. I carefully scraped off the excess filler before leaving it to set overnight.

Burnishing Travertine Tiles

The next day I used 17″ wet and dry paper to remove the excess filler and to cut out some of the deep scratches in the travertine. This I followed by honing and polishing the floor using Tile Doctor burnishing pads which are diamond encrusted and come in a setup of four pads which are applied one after the other from Coarse, Medium, Fine and then Super Fine to restore the surface polish.

Sealing Travertine Tiles

On the third day I returned to seal the Travertine tiles using Tile Doctor Colour Grow which is a colour enhancing impregnating sealer that soaks into the pores of the stone occupying them and in doing so preventing dirt and soil from becoming ingrained into the stone. Colour Grow is also a colour enhancing product that brings out the colour in the stone

Travertine Tiled Floor Sandbanks After Cleaning
Unfortunately I didn’t remember to take a photo of the floor until after the initial clean but the effect of the filling and burnishing pad treatment should be visible.

Travertine Tiled Hallway Burnishing in Dorset

Cleaning a Travertine tiled hallway in Sandbanks Read More »


Dorset Tile Doctor

================================= Read More »

Scroll to Top