patio cleaning Archives - Dorset Tile Doctor

Black limestone patio test clean patch in Broadstone

Cleaning and Sealing A Black Limestone Patio in Broadstone, Dorset

Earlier in the year I was contacted by a client down in Broadstone (a town supposedly named after a local legend) to revamp 100 square metres of black Limestone patio, which hadn’t looked right ever since it was first laid. The main problem was water ingress where water had been allowed to seep into the stone due to a poor sealing job. This had caused natural salts to form, and the resulting rough surface had collected grout haze at installation. I decided to run a test on a small patch of the patio to determine the best methods for cleaning and removing the grout haze.

Cleaning Limestone patio with water ingress and grout haze

I decided to conduct my test on just one square metre of the Limestone patio. First of all, I used Tile Doctor Grout Clean Up on the grout, a cleaner which helped to remove the grout haze by penetrating beneath the surface and lifting the muck out.

After cleaning the grout I moved onto cleaning the tile itself, using a solution of Tile Doctor Pro-Clean and clean water in combination with a black buffing pad. After achieving some great results with this cleaning method, I left the test area to dry completely before the seal, as any excess moisture left on the surface could potentially affect the performance of the sealer.

Sealing the Limestone patio

My choice of sealer was Tile Doctor Colour Grow. Colour Grow is a multi-use product which works well on both internal and external unpolished surfaces. One of the great things about Colour Grow is that it is a colour intensifying sealer, meaning it really helped to bring out the black colour in the Limestone which had previously been affected by dirt and water ingress. The sealer will also provide durable protection against these types of problems in the future.

As you can see from the photos, the result of my test was very good – the stone became almost completely black once again, and the defects in the grout were successfully removed. Nonetheless, I decided to leave the test patch for a month to see how well it withstood the effects of the weather. The test patch proved very durable – proving that the sealing had been done properly this time – and my client subsequently hired me to restore the remaining 99 square metres of patio!

Cleaning a Stone Patio in Dorset

Cleaning and Sealing A Black Limestone Patio in Broadstone, Dorset Read More »

Removing Glue from a Portland Limestone Patio in Poole Harbour

This Portland Limestone patio on Round Island in Poole Harbour had, together with a sun room indoors, been covered in a thick layer of carpet glue which had set hard in the warm sun over the years and the owner had found it impossible to remove themselves. There’s no bridge so the island is serviced via a boat from the mainland, which as you can imagine made it a bit of a task getting all my equipment over there.

Cleaning Portland Limestone Flagstones

I began by using 17″ Starke Silicone carbide discs which at 24 grit are much coarser that the burnishing pads we usually use. To get the right level of traction I used the disks on a Numatic buffing machine that had been weighted down and the combination worked well to cut through the glue and turn as much as possible of it to dust.

Portland limestone patio round island begin

To remove the remaining glue I soaked the Limestone in a dilution of Tile Doctor Remove and Go and left on the glue overnight under sheets of plastic and dust sheets so it wouldn’t dry out it. It also ensures the product remains in contact with the glue and kept it away from any wildlife which might use the patio when I wasn’t there.

The next day the remaining glue had softened and I removed as much as I could using a black buffing pad attached to the buffing machine together with a strong dilution of Tile Doctor Pro-Clean before applying more Remove and Go again and steaming each tile in turn whilst brushing with a brass coated Spid wire brush.

Portland limestone patio round island during

This was quite a lot of work and as the stone was not dense and had wide pores the glue had sunk in deep when it was applied and I had to repeat this process several times before the stone was clean. Finally I used a pressure washer to thoroughly rinse and clean the stone before re-pointing where necessary.

patio cleaning